M-Audio USB Uno 1Ks1 MIDI interfejs je kompletno USB-to-MIDI rešenje, opremljeno USB vezom sa vašim računarom i 1-in/1-out 16-kanalnom MIDI vezom za vaše MIDI uređaje. Mala jedinica dolazi sa USB i MIDI produžnim kablovima, ima MIDI indikatore aktivnosti i radi sa Vindovs ili Mac. Pojedinačni MIDI ulazni i izlazni konektori čine ga savršenim za brzo i jednostavno povezivanje tastature ili kontrolera sa računarom. Napaja se preko USB porta. USB podržava povezivanje do 127 uređaja istovremeno, od kojih se svaki može priključiti sa USB magistrale u bilo kom trenutku. Zahtevi:Windows 98 SE, 2000, ME, or XP; Mac OS X 10.1.5 or greater.

• Lundahl LL1538 mic input transformer
• Up to 80 dB gain
• Variable input impedance
• High-pass filter with variable cut-off
• 2x XLR mic inputs
• 2x Line inputs, 6.3 mm jack
• 2x Instrument inputs, 6.3 mm jack
• Insert per channel
• Line out XLR
• LED meter per channel
• Switchable phantom power: 48V
• Internal power supply
• 19″, 1 U
• ROK ISPORUKE 10 tak dana

Features

• High definition 24-bit/96kHz audio plus MIDI interface for iPhone, iPad, Mac, PC and Android devices
• Connects to everything, yet easily fits in your laptop bag, gig bag or pocket
• Neutrik™ combo input for guitar, microphone or other instruments with a professional quality preamp, phantom power and gain control
• iPhone 7 ready with integrated headphone output with volume control
• Powered via USB bus, two AA batteries or the optional iRig PSU 3A (PSU simultaneously charges iOS device)
• Detachable Lightning and USB cables included for connection to iPhone, iPad, Mac and PC (MFi certified)
• Comes with a Velcro strip to secure iRig Pro I/O to a mic stand
• Comes with over $/€550 worth of full version Software & Apps

All your gear, all the time

iRig Pro I/O is designed for all your gear — studio mics, vocal mics, guitars, basses, keyboards, sound modules, MIDI Controllers — you name it. At its core, iRig Pro I/O features 24-bit A/D and D/A converters, and a 96kHz sample rate for professional quality audio on the go. When using a studio microphone, iRig Pro I/O can supply 48V of phantom power to the XLR jack for your active condensers. Plus, you can dial in the perfect and precise amount of gain with the new marked gain control knob. Recalling your gain settings for your mics and instruments has never been easier.

iRig Pro I/O also features a 1/4″ Hi-Z input that easily handles passive and active pickup configurations. Again, the numbered gain wheel lets you dial in the perfect amount of input signal for your recordings and recall them with ease.

Use your studio mics anywhere

With iRig Pro I/O, you can use any microphone you own because it sports onboard 48V switchable phantom power for your condensers. iRig Pro I/O features a combination Neutrik XLR and 1/4″ input jack, and an input gain control with a calibrated oversize knob for precise gain setting and recall. Now setup with your studio gear is easier than ever before. Simply plug in, adjust your input gain and hit record.

Listen Up

One of the major advancements of iRig Pro I/O is the addition of an 1/8″ stereo headphone output with preamp and level control. Now you can play, record and monitor with all of your devices — even the most recent iPhones and iPads — with the depth and headroom you’d get only from a traditional recording studio setup.

MIDI In, MIDI Out

In addition to the MIDI IN jack, iRig Pro I/O now features a MIDI OUT (thru) for even more routing flexibility. Now connect your outboard keyboards, controllers and sound modules and even control surfaces with just one simple interface. iRig Pro I/O comes complete with two standard 5-pin MIDI to 2.5 mm cables for hookup.

Power Up

iRig Pro I/O has multiple power options depending upon your recording preferences.

When used as a standalone interface for iPhone, iPad or Android device, you can power iRig Pro I/O with 2 – AA batteries that also provide switchable 48V phantom power for condenser mics.

When used with a Mac/PC, iRig Pro I/O gets its power from the USB port and the connected laptop. Whichever method you choose, iRig Pro I/O will adapt and is ready to go at a moment’s notice.

Fully Loaded

iRig Pro I/O comes with over $/€550 worth of full version IK Software including AmpliTube for iOS, AmpliTube 4 for Mac/PC, SampleTank 3 SE, T-RackS Deluxe with Mic Room, and more. No other interface gives you so much value and playability right out of the box. With iRig Pro I/O and IK Software, there’s no limit to what you can do.

The hot Audio WA12 is an excellent, single-channel 312-style microphone and Instrumentenpreamp. He is with Cinemag input and output transformers equipped (Made in USA), which also provide in hi-end devices like the Presonus ADL-700, A-Designs Pacifica or Universal Audio LA-610 for the corresponding signal quality. Features:

• 1-channel mic preamp
• 9.5 “/ 1U
• 71dB gain
• Custom Designed Cinemag input and output transformer (Made in USA!)
• TONE switch – switches the input impedance of 600 Ohm to 150ohm (sound change both the microphone and the instrument input)
• Front panel Hi-Z input sends the signal through the entire circuit (both by the Cinemag transformers and by the discrete op-amp).
• 100% discrete circuit
• 1731 Style Op-Amp
• Microphone input: XLR / TRS combo
• Balanced outputs: XLR and 6.3 mm jack
• 48V phantom power
• -20dB pad
• Phase reverse switch
• External 24V power supply module for low noise

1-CHANNEL MICROPHONE AND INSTRUMENT PREAMPLIFIER

The hot Audio Tone Beast TB12 is a discrete, single-channel microphone and instrument in the 312 design . He is with Cinemag input and output transformersequipped (Made in USA), which provide already in hi-end devices such as the Presonus ADL-700, A-Designs Pacifica or Universal Audio LA-610 for the corresponding signal quality. Features:

• 1-channel microphone and Instrumentenpreamp
• 19 “/ 1U
• 71dB gain
• The Transformer bypass switch takes the output transformer of the signal chain
• Steel and 50% nickel exchanger for different tone shaping
• Two different discrete op amps: 1731 (Vintage) and 918 (Cleaner)
• TONE switch – switches the input impedance of 600 Ohm to 150ohm (sound change both the microphone and the instrument input)
• Front panel Hi-Z input sends the signal through the entire circuit
• Microphone input: XLR (front and back), symmetrical 6,3mm
• Instrument Input: 6,3mm
• Balanced outputs: XLR and 6.3 mm jack
• Insert: 6,3mm
• 48V phantom power
• -20dB pad
• Phase reverse switch
• LoCut
• LED Meter
• External 24V power supply module for low noise

FET COMPRESOR i LIMITER

The hot Audio WA76 is a modern replica of the probably most well-known compressor ever, the Urei 1176 .
Due to the relatively low price of the WA76 manages Warm Audio but the Studio Classics also become a “must have” for project studios without professional budget to make. The ultrafast attack times and the special, distinct sound made ​​the 1176 end of the 1960s quickly became the favorite of studio professionals worldwide. Since then, he is one of the absolute classics of the scene and provides up today for bright engineers eyes and ears. The WA76 is CineMag input and output transformers equipped (Made in USA), which were built already in the original – at that time still under the name of “Reichenbach Engineering “.

Features:

• Mono FET Compressor / Limiter
• 1176 replica (Revision D)
• 19 “/ 2U
• Discrete circuit
• CineMag input and output transformer (Made in USA)
• Extremely fast attack times
• Class A output amplifier
• Input impedance 600Ohm
• Frequency Response: ± 1 dB @ 20 Hz to 20 kHz
• Connections: XLR and jack (input and output)
• 55dB gain
• -23dB pad
• Less than 0.4% THD in limiting mode in the range of 50Hz to 20kHz
• Noise Ratio: 74dB
• Attack time: 20 microseconds to 800 microseconds
• Release times: 50 milliseconds to 1 second
• Ratio: 4: 1, 8: 1, 12: 1, 20: 1, and “All buttons in” mode
• VU meter: Gain Reduction (in dB) or output (in dB)
• Internal power supply, external 24V AC Power Adapter